|
| |
Aquatec ERP 1000 Permeate PumpERP 1000 Permeate Pump Distinguishing Features:
- For membranes rated from 10 to 120 GPD
- Requires no electricity
- pump powered by energy from brine normally lost to the drain
- Improves water quality
- Effective for inlet water pressure as low as 30 psi
- Fills product tank up to 5 times faster under normal use
- Saves 400% of waste water vs. conventional units
- Allows smaller capacity membranes
- Increases membrane life
- Prevents 'membrane TDS creep'
- Allows greater product tank pressure (90% of feed pressure)
- Compact size
- Add to any Reverse Osmosis System
- Increases water flow from faucet
- Saves water
- Ideal for low water pressure (30 PSI) application
- 30% more tank pressure
- Faster delivery
- Increases filter life
- Requires no electricity
- Perfect for basement installations
The permeate pump is a turbine pump that utilizes waste water energy to pump the product water into the storage tank. This shields the membrane from the tank pressure, maintaining maximum osmotic pressure at all times. Higher osmotic pressure makes higher purity water. Production rate is directly related to the pressure pushing through the membrane. Without the permeate pump, tank pressure pushes against incoming pressure reducing the driving force through the membrane. Technical Specifications PUMP DESIGN: Positive displacement, reciprocating, single action diaphragm, hydraulically driven. WEIGHT: 1 lb. WETTED MATERIALS-PERMEATE SIDE: NSF listed and FDA approved thermoplastic, EPDM. NON WETTED MATERIALS: Stainless Steel, Polypropylene. MOUNTING: Always mount pump with outlet ports up. Mounting clip (ABS) with (2) #10 S.S. screws available. FITTINGS: Optional Jaco or John Guest straight or elbow. Manifold RO Systems such as Culligan, Microline & Hydrotech require additional adaptor fittings - choose it in selection.
|
|
|